Butyl Sealant Tape - Best Sealing Waterproof Material for Construction Butyl tape uses butyl rubber and polyisobutylene as main raw materials and reconciles, squeezes into strips, covered with isolation paper. And coil it into a roll shape. Through these steps, butyl tape is finished.
1. Highly tacky to almost any surface, such as steel, pipe, PVC, gutter cement. Marble etc.
2. Permanently soft self-adjustable and good adhesion to the applied surface.
3. Safe. No odor, no VOC, eco-friendly.
4. Easy. No tools are required but only a utility knife.
5. Flexible. Behave very well on odd-shaped surfaces.
6. Cold applied. No heating is required.
Butyl waterproof tape Universal used in:
1) Connecting between color steel plate and lighting board of steel roof, and sealing at the connection place of drowning gutter.
2) The doors and Windows, concrete roof and ventilation duct shall be sealed and waterproof.
3) Installation of the PC board and endurance board.
4) Waterproof film of car doors and Windows is pasted and sealed for earthquake resistance.
5) Single-sided tape can also repair leakage parts such as r roof and first car trunk.
Step 1: Clean up Before the construction, the surface of the base must be cleaned or wiped clean, and kept dry without water,
floating soil, or oil.
Step 2: Cut off Cut or choose the proper size of butyl sealing tape according to actual working conditions.
Step 3: Tear off Tear off the release film on the back of butyl tape and paste it on the gap.
Step 4: Paste on After the adhesive tape is pasted, press the tape with hands or rollers to make the tape fully bond with the base surface.